This is an N Male Clamp For LMR600 Cable, the RF connector for LMR-600 coax and other 600-series cables. This is the familiar N-type male connector type used in wireless and other high frequency applications such as RF test equipment, base stations, and long runs of coax cable. It is designed to be used on cables with 50 Ohm impedance such as most RF systems and maintain low return loss over a broad bandwidth. The clamp attaches around the outside of the cable, gripping the outer jacket and the braid of the shield. It provides a solid mechanical connection and a good, consistent electrical connection. This style of connector is suitable for fixed or mobile use and provides a secure, vibration-resistant connection. Typical construction of this type of RF connector includes a durable metal body with corrosion-resistant plating, a machined center pin for good RF signal transfer, and a quality insulator between the center pin and the outer braid. The connectors have low insertion loss and maintain good VSWR. They are rugged and can be used in harsh environments for long periods of time. The N Male style of connector is a straight male connector, often referred to as an “N Male”. The N Male connector type mates with an N Female connector, such as those found on the ends of most radios, amplifiers, antennas and other RF equipment as well as on the ends of cables which are used to connect pieces of equipment together in a distribution system. The N Male Clamp For LMR600 Cable is a simple connector to attach to the end of an LMR-600 cable. To connect, first prepare the end of the cable by cutting it to the required length and then strip the outer jacket and any braided shield back from the end of the cable. Next, place the clamp and ferrule section of the connector over the cable, followed by the body of the connector. Seat the body of the connector fully onto the section of the cable which has been prepared, then secure the clamp by tightening the screw. This will complete the attachment of the connector to the cable and provide a solid, reliable connection. The connector is suitable for use on towers, rooftops, and in equipment racks. The N Male Clamp For LMR600 Cable is an ideal RF connector for making permanent connections to LMR-600 cables in a wide variety of wireless and other high frequency applications. It is a professional-grade connector, which is easy to attach to a cable and provides a reliable, long lasting connection. It is also a good idea to have a few of these connectors in stock, as spares, should you need to do repairs to existing connections in the future.

• Designed for **LMR-600 and 600-series coaxial cables** for a precise mechanical and electrical fit
• Standard **N-type male interface** for compatibility with common N female RF ports
• **Clamp-style attachment** for a secure
• mechanically stable cable termination
• Optimized for **50 Ohm RF systems** to help reduce return loss and maintain signal integrity
• Straight male configuration for easy connection to antennas
• radios
• and RF equipment
• Durable metal body with corrosion-resistant finish for long-term indoor or outdoor use
• Reliable performance over a **wide frequency range**
• suitable for many RF and wireless applications
• Supports **low-loss
• high-power RF transmission** when used with quality LMR-600 cable